How To Draw A Plan Of A House By Step By Step

Offset Draw the plot expanse on the sheet and decide the requirement. Following are the requirements of the basic house,

How to Draw a House Plan by Hand — **Plot Area**

1 – Kitchen

two – Bed Room

1 – Cartoon Room

ane – Bath plus W/C

1 – Store Room

i – Dining Room

1 – Parking for car

Read More: Edifice Construction Stride Past Step Process

Draw a House Plan by Hand Step By Step Guide

1) First, fix a rough chimera diagram indicating the probable location of the various room in the plot area.

ii) From that ready the line program for a residential building before preparing the detailed sketch because alternative line plans would give telescopic for comparison by making changes in the size of some rooms according to the owner's requirements.

Line Plan of Residential Building — **Line Program of Residential Building**

How to Draw a House Plan past Hand

2) While preparing the sketch plan, the line program with reference to the site plan, shape of the plot, north direction, direction of the prevailing wind, main road and view of surroundings, etc. should be kept in heed.

3) The sketch plan should be prepared on a tracing paper. Beginners may keep a graph below the tracing paper. This will aid them to relieve a lot of fourth dimension.

4) Wall thickness, expanse of each unit, proper noun of the downward location of sanitary units, staircase, flight of steps, landing upward and directions, passage width, position of doors and windows, columns and beams, archway gate, chemical compound wall, path from gate to the building, chajjas and canopy projections should be clearly mentioned in the sketch program.

Read More: Estimation Of A Building With Program

How to Draw a House Plan by Hand

5) Draw all exterior wall lines equally lite lines by using a 2H pencil.

half-dozen) The thickness of the wall should be drawn as per given framed structures may have external walls of 230 mm thickness and internal walls of 150 mm thickness. So, the wall thickness in the plan is 230 mm.

Mostly, wall thickness in floor program is 150 mm thick wall including plaster both sides or 200 mm thick wall excluding plastering is meliorate than 230 mm thick wall with plastering.

Similarly, a 100 mm thick wall excluding the plaster thickness is better than a 150 mm thick wall with plastering with reference to strength. (So, thickness of wall in floor programme in mm is 230 mm)

Load-bearing structures will take 200 mm to 300 mm thick walls. Any wall having a thickness of less than 200 mm cannot be a load-bearing wall.

seven) Study articulate internal dimensions of the rooms and describe lines for internal walls with wall thickness.

8) For public buildings doors and windows open exterior. Hence doors, windows, and ventilators are aligned to be flush with outside. For residential and individual houses, they open inside and the door, window and ventilator frames must exist kept in affluent with the inside of the wall. This is to create a full swing of the shutter and maximum clearance through the opening.

ix) Study the motility in the house from one room to another room or passage through the door and show the shutter with the direction of opening past the symbol.

How to Depict a Business firm Plan by Mitt

Read More: The Standard Room Size & Location In Residential Building

10) Plan door openings judiciously. No shutter should partly or fully cake the opening of another door or window. The space between two adjacent door openings automatically becomes passage and passage should be always free.

eleven) Draw kitchen platform, sink, built-in cupboard, W.C. pan (commode), washbasin, staircase, front and rear steps.

12) Verandah cavalcade should not obstruct the full view of the principal entrance door or the window of the cartoon-room.

xiii) Projections from walls as sunshades, porches, and beams from the verandah column which are higher up the sill level of windows are to exist shown in dotted lines.

14) Draw extension lines and dimension lines on all sides.

15) Write articulate room dimensions every bit per the line plan (first along the horizontal axis and next forth a vertical axis on the drawing sheet). In the case of framed structures centre to heart and overall dimensions should exist shown.

Read More: Building Bye-laws And Standard Dimensions Of Edifice Units

sixteen) Take every care while choosing the correct place for writing dimensions and names so that they are quite legible and non crowded and should never go conventional symbols/signs out of the room. They should neither become unnoticed nor get eclipsed by

The overall dimension of the side must tally with the sum of dimensions in series forth the direction.

17) The overall dimension of all the four sides of the edifice (including off-sets likewise If any) should be mentioned. (How to Draw a Firm Program by Hand)

18) Describe a line of 5 mm height, roughly at the centre of the room for the title.

19) Write a complete specification for doors, windows, and ventilators.

20) The arrows to bespeak an object should point from the description to the object and non from object to the description.

21) Scale for plan should exist written as 1 cm = 1 metre only non as 1 chiliad = 1 cm. i.eastward., It should exist a fraction merely never more than 1.

22) The programme is generally drawn to a scale of 1:50, 1:100 or one:200 every bit per the size of the building.

23) Go for conventions and symbols for stone masonry, brick masonry, wood, and concrete works, and M.50., etc. only after dimensioning and indicating names. Conventions must exist in a lighter shade compared to the main drawing (drawn with 2H pencil). The hatching or the other conventional signs should never muffle the dimensions or letters or whatsoever other details.

How to Draw a House Plan by Hand

Watch Video: How to Depict House Plan – 1

You Might Also Similar