How To Draw A Coat With A Hood

Question

The primary problem is that y'all are not matching the OEM clear coat coefficient of reflection. It was above Dupli-color's Protective Clear Glaze Finish. You need to use Spray Max semi-gloss for clear coats.

Colour matching technology is well established. There, you can use junky 1k (that is, slow drying) Duplicolor or whatsoever for the base of operations coat. (If you enjoy waiting around.) But, for the clear glaze, you need to be using a high tech product. The chemistry is very complex. My guess information technology that Spray Max has the patents, so they accept the market's all-time products, but information technology does not really matter why. Using their 2k products volition allow you lot to match the reflection coefficient, which is what you demand to exercise.

If you want, yous can download https://world wide web.spraymax.com/fileadmin/user_upload/Downloads/Produkte/Prospekte/992466-SprayMax-Produktfolder_USA.pdf and get to the clear coat section. Information technology will say y'all take two options, matte and gloss, but you really take more. There are probably high gloss, gloss, semi-gloss, semi-matte, and matte clearcoats past Spray Max out there. As I said, the one I retrieve you want is semi-gloss. (Gloss will probably be too reflective.) More specifically, I think you desire 680067 semi gloss clear-glaze/ (400 ml) 36+/-2 gloss units at 60° measuring angle. Y'all don't need to sand or take multiple layers.

Unlike waxes volition assistance you lot vary the reflection coefficient for perfect matching between these three-5 levels, but it is amend to match the clear coat coefficient of reflection then you don't need to use different waxes for each trunk role.

Having given what I call up is the all-time answer, I'll at present plough to what's wrong with the other x answers set out before me. Afterwards all, it is pretty dumb to be answering a question that was already correctly answered!

Well-nigh other answers complain most sanding. Equally I explain, information technology volition have zero event if yous employ plenty paint on the last layer. Lack of sanding could make clear glaze peel, but that's not your problem.

Incidentally, this is not pop communication, but I don't recall you lot actually need more than than a unmarried layer with Sprax Max 2k. It will probably adhere well enough to have a single layer. It is that good of a product. You don't even need to sand off the Dupli-junk articulate coat.

Before now, user35183 and SteveRacer had the best respond, proverb that Dupli-color is junk. Only, neither gave y'all a specific alternative you tin can use.

Several answers complain about thickness (number of coats). No, that's not your problem either. It may be good advice for painting, but information technology will not help you. Yous just need to make sure that the last layer is thick enough that the droplets combine on the surface.

Bad final top of elevation coat layer which will result in orange peel yous'll need to sand:

enter image description here